Details of the Venus 2000

Liberated Christians
Cyber Swing/Polyamory Resource Center
Promoting Intimacy and Other-Centered Sexuality


Details of the Venus 2000
A look inside the V2000

FEATURES OF THE V2000 POWER UNIT

Advantages of remote-control: Allows you to place unit further away
On floor while in bed On floor when standing On floor while seated in a chair or on a bathroom stool On a shelf or stand out of arm's reach When detached, there is nothing o the unit to indicate what it is or what it does V2000s purchased without remote-control can NOT be upgraded.

Advantages of non-remote: (On/Off switch and speed control are on the unit.)
Costs $60 less. You do not have the extra cable to store. Do not need to plug-in and un-plug the remote each time you put it away.

COMPACT: 6" high (including rubber feet and handle), 8" wide and 9-1/2" long. (Smaller than a sheet of paper.) The weight is 11 pounds.

HANDLE: Convenient and balanced for ease when moving it.

QUALITY GEARMOTOR: The unit is powered by a very high quality 1/16 HP - 10:1 ratio Gearmotor made by Bodine Electric Co.

HEART OF THE SYSTEM: Air is moved by a specially designed and molded, one-of-a-kind diaphragm. It has the ability to push and pull air at a high speed and remain nearly silent.

QUIET: It makes very little sound. On slower speeds you can only feel that it is running.

PERSONALIZED STROKE-LENGTH ADJUSTMENT: The V2000 has 5 internal settings that control the amount of airflow. Once properly set, most users do not need to make any further adjustment in stroke length.

FINE AIR ADJUSTMENT: The degree of arousal (erection) sometimes requires a fine adjustment in the stroke length. Each V2000 includes a 60 cc syringe to make these adjustments possible, precise and easy.

ADDITIONAL CONTROL: Each unit has a lighted ON/OFF switch. You can turn the unit OFF when you wish to stop the action immediately. You will return to the same stroke speed when it is turned back on.

GREAT SECURITY: It is protected by a fuse and is shipped with one spare fuse.

MODEST: Everything is black: case, handle, feet, power cord, remote control cord, remote control box, even the tubing.

DISCREET: The V2000 has no markings or identification. It has an attractive non-descript black textured housing. The power cord, remote-control and both hoses disconnect from the unit. When traveling you can identify it any way you wish. EXAMPLE: "Its my rock polishing machine."

PRECISE SPEED CONTROL: Control knob varies stroke speed from beginning to end of rotation.

WIDE SPEED RANGE: Operates from 20 to 350 cycles per minute.

EASY SET-UP: It takes less than 2 minutes to get the unit out and have it ready to go.

EASY TO PUT AWAY: With the purchase of the Large Zippered Bag, everything can be put away in a easy, convenient and attractive manner in less than two minutes.



FEATURES OF THE CUSTOM FIT ATTACHMENTS
WE HAVE FOUR CONFIGURATIONS OF ATTACHMENTS* RECEIVER: A Receiver is a stroking device that is enclosed but with a removable "End Cap" for easy cleaning. It is used for masturbation and can be operated manually with erection but when attached to the V2000 it strokes "hands free". The primary attachment used with the V2000. PUMP: A pump is used for enhancement. It will give every user a full erection by pulling blood into the penis. Used regularly, it is excellent for good penial health. (Use it or lose it.) HEAD MASSAGER: A 3 inch long Receiver without an End Cap. May be used to stroke manually and doing so is very pleasurable. When used with the V2000, it is positioned where desired, by hand, and each time the unit cycles it does a squeeze-release action. Very erotic and used by many before switching to the Receiver. NIPPLE MASSAGER: This can be configured to either do a squeeze-release action or create a suction-release action. * By placing a Y connection in the large hose, certain attachments may be used in dual.

WE HAVE THREE DIAMETERS OF HOUSINGS FOR ATTACHMENTS AND IN MANY LENGTHS

HOUSINGS: The attachments are made from a clear plastic acrylic and we have them available in a 2", 2.5" or 3" inside diameter. All Housings have an air port on the side to connect the hose going back to the V2000. The Head Massager and Nipple Massager are 3" in length while the Receiver and Pump are stocked in 6", 7", 8" and 9" lengths. We can make any length by custom order. Some 80% of men fit into the 2" housing and the 6" length is the most common. All Receivers are sized so that the Housing is at least .5" longer than the erect penis and the Pump is sized to be at least 1" longer.

WE HAVE MANY SIZES OF LINER MATERIAL THAT FIT INSIDE THE HOUSING:

LINER MATERIAL: Liner material is used in several ways within the Housing. The two primary uses are to cause constriction at the entrance to the Housing (this provides the seal necessary to prevent air from entering.) and as shaft lining to hug and massage the full length of the shaft during each stroke. The liner is measured by laying it flat and measuring across. We have, in stock, 1.62", 1.75", 1.88", 2.00", 2.12", 2.25", 2.50" and 3.00". We sell it in 30" lengths so you may cut the sizes needed for your configuration and use. This is something most users can install without problem and we provide complete instructions on how this is done.

WE HAVE END CAPS TO FIT ALL THREE HOUSINGS AND IN TWO FORMS:

END CAPS: End-Caps are used on all attachments except the Head Massager. The End-Cap is removable so you can run water through the attachment to clean it. Every End-Cap has a one-way air valve to allow any air to escape that that may have infiltrated past the constriction. End-Caps are available with two valves at an added cost of $10.